what do you use for a bowl?

[Tarential]

Actually in a trumpet mouthpiece the shaft is pretty narrow. If you're still sucking weed through it, then your problem is easily solved by cutting a small section of your screen door out, there's usually some excess sticking out the sides.

Or you can go to the hardware store and buy real screens for like 45c.

[Cyanid3]

I took the antenna off of an old rc truck, and cut it off so i had about 4 or 5 segments of hollow, collapsable metal tube. I simply took a small rubber band (hair rubber band thing) and wound it around the very bottom of it (so u don't push it in and end up not bein able to get it out) and took umm, well shit, i dunno what it is really, it's some kind of little bowl shaped (bowl as in cereal bowl) thing lol...anyways i filed down the top of my antenna and the little bowl fit damn perfect onto the top of it. It was so stupidly cool (we were high) that we played with it for like 2 hours, even smoked out of it like it was a chillum. By the end of our smokin session the screen was pretty well in there and i'm a happy camper, exvept for the fact that the bowl is over at my buddy mikes and i can't get it cuz he's in florida...

[punx_not_dead]

k man, use anyting that wont burn, i perfer a cork or just that the lid off a pop bottle and put some fuckin tinfoil in it

[tankooo1]

you can get a nice glass slide for 5 bucks anywhere they sell weed-products

[stnoed]

socket.. 19mm works good. attach it to a tube like a thick PVC thing or even a pen tube just be careful..

and if your makin a water bong-

USE GUM TO SEAL IT OFF!

so obvious.

im an idiot.

[boondox]

i just ran to my basement and found this old ass shitty trumpet, the mouthpiece just slipped off, it looks like its gonna work perfect

[bong man]

Dude just get a socket and rip some metel screen out your winder and put it in the socket and smoke away.

[BUDA]

well i use a thimbel that has holes in it works well but iif i stack the pipe to the top its a fucking mountain to smoke (and if u dnt no a thimbel is a thing u put on ur finger wen ur sewing i think )

[weedeye]

if for some weird reason I don't have my bowl with me

-soda can *dent the side and put some holes in the dent and if you'd like make a hole for a card

-an apple *take a knife and hallow out a cone shape where the stem is and put foil there , then make a two holes from the side of the apple to the cone one for a mouth piece and one for a carb- I find the holes are easy to make with stabbing a pen into the side

-a hallowed out pen and a soda cap with some foil* melt the pen to the side of the cap and put foil inside the cap and poke holes where the pen is

there are like a million more things that you can do I am just to stoned to feel like writing them.... so be creative if there is a will there is a way

[MOTSI]

Im not sure if someone already suggested this or not(i didnt read the entire forum). But a thimble works really great. You just punch a bunch of little holes in the bottom and you have a good sized bowl with a built in screen. It probly dosnt work as well as a mouthpiece of an instument because you have to make a stem for the thimble which can be hard. But you can use clay and a metal pipe or pen casing of some sort to put it togeather. I use femo clay so i can decorate it all trippy. Making your own apparatices is actually pretty easy. Just get creative. Try to think of something that no one else has and you'll have a wicked piece of art. Cheers.