www.weedguru.com

I finally finished my homemade two chamber bong this arvo. I've included some pics below of it. Basically, you can work it by either filling up one chamber and using the other to suck, allowing the smoke to cool further, or fill them both up, which refines the smoke so it's PURE white. If anyone wants the specs let me know and I'll post them up.

I tried making one of those before and found it didn't work. In theory plastic bottles would collapse instead of pushing the suction through the tubes. DOES it work?

Yep, it works. I used poweraid bottles which are much stronger than normal bottles.

AH HA! That explains it....I must try it with that....but I have hookahs for some to make first

whats so great about hookas?

for it can not be expressed in person dear Shredd, it must be experienced. First created by the arabs for marijuana and opium use during religious rituals, hookahs have become the center of symmetry smoking and the bonding it produces between the users.


oh and the games with it own any other intoxication games

Yeah, smoking with a hookah is a pretty cool experience. I was going to get one up in QLD a couple of months ago but it was like 25 bucks for the tiniest one - too much money at the time.

i'd like the specs up, or if you could mail them to me at spirit_in_black69@hotmail.com I'd be really grateful

Ok, specs are as follows.

To start off you'll need two bottles. I always use poweraid bottles, since they seem to be more durable than bottles like coke.

You also need two lengths of hose. The bigger one will be the tube from your cone piece down to the bottom of the first bottle. The other piece will link the two bottles together.

I kept the lid screwed on the first bottle and simply sawed the pop-up top off and used a file around the edges so the pipe could fit through. I then used a glue gun to seal it (two applications is good, second one will catch any air leaks.)

The same goes for the link between the two bottles. Instead of burning a hole for the pipe, I used a drill for both bottles and filed away and excess plastic. Then apply two applications of glue to either side of the link.

Basically, your done. All you need a conepiece. I used a socket wrench piece, since I didn't have any spares around, but it still works. Just attach it to the end of your tube in the first bottle with a bit of ductape.

And there you go, a fully functioning homemade two chamber bong. The one I made works perfectly, no air or water leaks and the smoke is really easy to take down, cuz I filled the two bottles nearly to the brim and it took 3 breaths to bring it to my mouth

Bong>Hookah's - 3rd Eye

might have to give that one a go

Try using plastic flexible tubes to connect the bottles and not some hard metal tube

I used hose.

that pretty sweet....

Some day when I'm really bored I wanna make like a 5 chamber bong that has like hot, cold, hot, cold, ice. That would kick ass.